WMF Presto User Manual

25
User Manual WMFpresto!
Software | Care
The following is needed for descaling:
• 2bottles of WMFliquid descaling agent (0.75l each)
• 3bottles of warm water (total 2.25l)
• 5-litre collection container
(for coffee machines without drain connection)
If the coffee machine is still hot acooling routine initially
starts. The cooling routine takes 5–10min.
Displays lead step by step through the program. Follow
the instructions.
Descaling coffee machine with water tank or Aquaflex
Preparation
 Remove water tank
 Stir liquid descaling agent in water tank with warm
water
 If crystals have formed when stored below the freezing
point, stir until all crystals present in the liquid
descaling agent have dissolved
 Replace water tank filled with descaling solution
 Place acollection container with approx. 5litres
capacity under the hot water spout
Descaling
Descaling starts. This part of the routine takes about
40min.
 After descaling, carefully empty the collection container
 Replace the collection container
 Empty remaining descaling solution from water tank
 Rinse water tank and fill to maximum with cold water.
See the markings on the outside of the water tank.
 Insert the water tank
Caution
Hot steam and hot
water.
Burn hazard
Scalding hazard.
Observe the Safety chapter.
descaling
Crystals may form in the liquid
descaling agent when stored.
The crystals must not enter the
machine.
The ideal water temperature is
approx. 37°C.
Order numbers of the article
w Appendix
Accessories and spare parts
page 68

WMF Presto Specifications

General

Brand	WMF
Model	Presto
Category	Coffee Maker
Language	English