3.3.1 Milk and foam
Milk foam quality
The milk foam quality is set here.
This setting will apply to all beverages with milk foam.
Compensates for variations in milk characteristics.
Reduce setting value -> finer foam and lower dispensing
temperature
Increase setting value -> coarser foam and higher
dispensing temperature
Latte macchiato pause interval
Latte macchiato is more successful if the interval between
milk and milk foam dispensing is lengthened.
Reduce setting value -> shorter interval
Increase setting value -> longer interval
3.3.2 Timer program
The timer program sets the switch on and switch off times.
The “Timer program” main menu contains the following
selection options.
• Timer state
• Set timer
• Timer overview
• Delete timer
• Timer information
Other illustrations of the main
menu for protected levels.
w PIN rights, access control
page 36
foam quality
PIN rights, access control
w Software
w Settings
w PIN rights, access control
page 36
To Next Page
Loading...
Need help?
General
