Software | Settings
Operating options
The following operating options are available.
• “Warm rinse” pad (active/inactive)
• Barista pad (active/inactive)
• 2nd level (active/inactive)
• ON/OFF button (direct/via PIN)
• Cancel beverage (yes / no)
• Menu pad (immediate/delayed)
• Error message (normal/symbol)
“Warm rinse” pad
Recommendation for self-service: inactive.
Barista pad
Recommendation for self-service: inactive.
2nd level/shift pad
Recommendation for self-service: inactive.
ON/OFF button
Recommendation for self-service: via PIN.
If “via PIN” is set, then the PIN for the Cleaning level will
be queried before switching on or off.
Cancel beverage
Recommendation for self-service: no.
Menu pad
Recommendation for self-service: delayed.
If “delayed” is set, the menu pad will only be shown if the
display is pressed twice.
Error message
normal: all messages are shown on the display.
Symbol: messages that require immediate action are
shown on the display.
All other messages are displayed as symbol .
Touch the symbol
All messages are displayed.
If customers serve themselves then
some functions can be switched
to inactive.
The pads will not be displayed on
the “Ready to operate” display.
w PIN rights, access control
page 36
w To the main menu
page 19
With illumination (optional):
messages that require immediate
action are accompanied by
flashing side illumination.
To Next Page
Loading...
