Care
Milk system cleaning Plug&Clean
Cleaning with Plug&Clean consists of three parts.
• Automatic foamer rinsing after each beverage with milk
or milk foam
• Display-guided Plug&Clean cleaning
• Once per week, place combi spout, milk hose and milk
nozzles in acleaning solution
5.2.3 Mixer rinsing
Mixer rinsing is an intermediate cleaning of the mixer.
Mixer rinsing is an integral part of the cleaning program.
5.2.4 Combi spout cleaning
Thorough cleaning of the milk system. The exact procedure
of this manual cleaning is described in the cleaning
instructions.
5.2.5 Milk container cleaning (optional)
Clean the milk container thoroughly every day.
5.2.6 General cleaning
Grounds container cleaning (grounds chute, optional)
Empty grounds container and rinse under running water
Clean with aclean, damp cloth
Drip tray, housing and front panel
Clean the cold coffee machine using adamp cloth
Wipe dry using afine woollen cloth or chamois leather
Cleaning metal surfaces
For cleaning metal cover parts (matte surface) we
recommend WMFPurargan® cleaner.
Do not clean with scouring powders or the like.
There is arisk of causing scratches or scores.
Do not use any sharp cleaners or implements.
Use soft cloths for cleaning.
Plug&Clean cleaning program
w Cleaning instructions
Mixer rinsing
w Cleaning instructions
Combi spout cleaning
w Cleaning instructions
Caution
Follow the hygiene
instructions.
See HACCP cleaning schedule
Order numbers for the WMFcare
program
w Appendix
Accessories and spare parts
page 68
Switch off the coffee machine
before cleaning the front panel
to avoid abeverage being
accidentally dispensed.
Hazards to the
machine.
Follow the manual.