Care
Thoroughly wipe out hopper with adamp cloth
Thoroughly clean individual dosing auger components
Allow product hopper and individual components to dry
completely
Re-assemble and replace the dosing auger and screw on
union nuts
Ensure correct orientation of discharge.
Refill and replace product hopper
Lock with the multitool by turning counter-clockwise
Special features of the Twin Topping hopper
The Twin Topping hopper is divided in the middle and has
two separate compartments for two different powder
products, e.g. Topping and Choc.
During assembly, take care that the two different dosing
augers are in the correct position.
1 = Choc
2 = Topping
With Twin Choc: dosing auger 1is used twice.
Never clean product hoppers in the dishwasher.
Portion controller with individual
parts, dosing auger
Twin Topping
1
2
Dismantled dosing augers
Hazards to the
machine.
Follow the manual.
To Next Page
Loading...
