Specifications
Engine/Motor Specifications
Specifications 60doc081208 8-2
8
8.3 Engine/Motor Specifications
See Table 8-2. The power options available for the LT70 Series sawmills are listed
below.
See Table 8-3. Power Feed and Up/Down Systems for the LT70 Series sawmills are
listed below
.
Patrz tabela 8-4. The noise levels of the Wood-Mizer sawmills are listed below.
12
Engine/Motor Type
1
1
Use diesel fuel for D42.
Manufacturer Model No. Power Other Specifications
42HP Diesel Kubota, Japan V1505-TE 42KM
4 cylinders, 1498 cm
3
25HP Electric Motor
2
2
The electric motors supplied on Wood-Mizer sawmills carry a rating assigned by the motor manufacturer
for the continuous duty operation of the motor, potentially, 24 hours per day, day after day. This rating is
useful in sizing motors for use in applications like blowers for heating and ventilation that are never cycled
off except for system maintenance.
Siemens,
Germany
1LA7166-2AA60Z 18,5kW 33,8 A, 2930 RPM
TABLE 8-2
Engine/Motor Type Manufacturer Voltage Power WM Part #
Power Feed Motor Leeson, USA 12V 1800 RPM-600W 023688
Up/Down Motor Leeson, USA 12V 1800 RPM-600W 015174
Blade Guide Arm Motor Motor Products
Owosso, USA
12V 60 RPM-17W P09698-1
Hydraulic Pump Motor Motor Products
Owosso, USA
12V 2400 RPM-1320W P09955
TABLE 8-3
Sawmill Noise Level L
EX8
Sawmill Equipped With Electric Motor 83 dB (A)
Sawmill Equipped With Gas Engine 87,4 dB (A)
TABELA. 8-4
1. The noise level measurement was taken in accordance with PN-EN ISO 3746
Standard. The noise exposure level given above concerns an 8-hour work day
To Next Page
Loading...
