Maintenance
Sawdust Removal
5
5-5 60HDdoc081208 Maintenance
5.3 Sawdust Removal
1. Remove the excess sawdust from the blade wheel housings and sawdust chute every
blade change.
2. Remove all sawdust and debris from around the velocity fuse valves every 8 hours of
operation. The valves are located at the bottom of the log loader cylinders.
3. Remove sawdust buildup as necessary from the battery box lid and top rail cover.
4. Remove sawdust buildup from the track rail cover.
CAUTION! Failure to remove sawdust buildup from the bat-
tery box lid and/or track rail cover could result in damage to
these parts when the saw head is lowered to its lowest
position.
AR
8
To Next Page
Loading...
