Sawmill Setup
Starting The Engine (or Motor)
Sawmill Setup 60HDdoc081208 3-14
3
3.8 Starting The Engine (or Motor)
See the appropriate manual supplied with your specific engine/motor configuration for
starting and operating instructions.
DANGER! Make sure all guards and covers are in place
and secured before operating or towing the sawmill. Failure
to do so may result in serious injury. Be sure the blade
housing and pulley covers are closed (i.e. the safety
switches located on them are engaged).
DANGER! Always be sure that all persons are out of the
path of the blade before starting the engine or motor. Fail-
ure to do so will result in serious injury.
WARNING! Always wear eye, ear, respiration, safety cloth-
ing, and foot protection when operating the sawmill. Failure
to do so may result in serious injury.
WARNING! Be sure the power feed switch is in the neutral
position before turning the key switch to the #1or #2 posi-
tion. This prevents accidental carriage movement which
may cause serious injury or death.
DANGER! Check the sawmill wiring every year. Make sure
all electrical installation, service and/or maintenance work
is performed by a qualified electrician.
WARNING! Hazardous voltage inside the electric box is
dangerous. Turn the main switch to the OFF (“0”) position
and lock out power supply before opening the box door!
WARNING! The door of the electric box can be opened
only when the main switch is in the “0” position. The door is
closed when the switch is in the “1” position. Serious dam-
age to the box may result while opening the door when the
main switch is in the “1” position.
CAUTION! If at any time you need to immediately stop the
blade motor, press the emergency stop button located on
the control box.
To Next Page
Loading...
