Sawmill Setup
Tracking The Blade
3
3-13 60HDdoc081208 Sawmill Setup
10. Turn the key switch to #0 position
11. Be sure to close the blade housing and pulley covers when the adjustment is complete.
DANGER! Make sure all guards and covers are in place
and secured before operating or towing the sawmill. Failure
to do so may result in serious injury. Be sure the blade
housing and pulley covers are closed (i.e. the safety
switches located on them are engaged).
IMPORTANT! After aligning the blade on the wheels,
always double-check the blade guide spacing and location.
(See Section 7
for more information.)
!
To Next Page
Loading...
Need help?
General
