Safety
Safety Instructions
Safety 60HDdoc081208 1-4
1
HANDLE FUEL/LUBRICANTS SAFELY
DANGER! Due to the flammable nature of fuel and oil, never
smoke, weld, grind or allow sparks near your engine or storage
tanks, especially during times of fueling.
DANGER! Never allow fuel to spill on a hot engine during fueling
operations or otherwise. The hot temperature of your engine could
induce a fire or explosion.
WARNING! Store gasoline away from sawdust and other flamma-
ble materials. Failure to do so may result in serious injury.
WARNING! Use ONLY water with the water lube accessory. Never
use flammable fuels or liquids. If these types of liquids are neces-
sary to clean the blade, remove it and clean with a rag. Failure to
do so may result in serious injury or death.
WARNING! Drum switch grease contains Petroleum Hydrocarbon
Lubricant. Eye and skin irritant. If introduced into eyes, flush with
water for at least 15 minutes. If film or irritation persists, seek med-
ical attention. Wash skin with soap and water. If ingested, do not
induce vomiting - contact a physician. KEEP OUT OF THE REACH
OF CHILDREN.
CAUTION! The sawmill’s work-stand should be equipped with a 4
kg or bigger dry powder extinguisher.
DISPOSE OF SAWING BY-PRODUCTS PROPERLY
IMPORTANT! Always properly dispose of all sawing by-products,
including sawdust and other debris, coolant, oil, fuel, oil filters and
fuel filters.
!
To Next Page
Loading...
Need help?
General
