50 Parts
32394 (Rev. 9/3/2004)
208-2 FRONT 2/3 DRIVE LINE WITH 1-1/2” SQUARE TELESCOPIC SHAFT
DC2159
1 -- COMPLETE DRIVE
NOTE: Four Styles of driveshafts have
been used on the 208 series cutters.
Check your driveshaft for square, splined,
tri-lobe, or two--lobe shape and order
repair parts from the correct parts list.
REF PART QTY DESCRIPTION
1 12530 1 Front 2/3 3-joint drive, 68-1/2”
2 13135 1 2 Joints shielded
3 3886 1 1/4 x 1/4 x 1-1/4 Key
4 13132 1 3-Joint drive bearing housing assem-
bly
5 12128 1 .062 x 72mm ID Snap ring
6 13133 1 1-1/2 ID Ball bearing
7 2985 * 1 1/4 - 28 Threaded 90° grease fitting
8 12531 1 3-Joint tubular shaft & sleeve 43”
9 115 1 Quick disconnect U-joint yoke
10 117 1 Lock pin and spring
11 110 2 U-joint repair kit
12 4663 1 Square shaft and yoke
13 4677 2 Nylon rectangular groove bearing
14 20477 1 Shield for front 2-joints
15 4673 1 Yoke with square hole
16 4674 1 3/8 x 2 Spiral pin
17 7276 1 7/16 x 2-1/2 Spiral pin
18 13136 1 1-1/2 Bore u-joint yoke
* Obtain Locally
REF PART QTY DESCRIPTION
To Next Page
Loading...
