Woods 208-2 - 208-2 & M208-2 Chain Shielding (Pull-Type & Mounted); 208-2 Tongue Assembly (Pull-Type Units Only)

Parts 53
32394 (Rev. 9/3/2004)
208-2 & M208-2 CHAIN SHIELDING (PULL-TYPE & MOUNTED)
208-2 TONGUE ASSEMBLY (PULL-TYPE UNITS ONLY)
DB2149
Ref Part No
No
No Used Description
1 28300 1 Front chain shield bundle complete
2 28302 2 Front chain plate
3 3994 ---- 5/16 Chain, 5--link
Ref Part No
No
No Used Description
4 28303 2 3/8 x 52--3/4 Pin, 42--chain
5 28290 1 Rear chain shield bundle
complete
6 28297 1 Left corner chain plate
7 28293 2 Rear chain plate
8 3773 2 3/8 x 38--1/2 Pin, 31--chain
9 28296 1 Right corner chain plate
10 11905 2 3/8 x 19--3/4 Pin, 16--chain
11 1256 * ---- 3/16 x 1 Cotter pin
12 6100 ---- 1/2 NC x 1--1/4 Hex head
cap screw GR5
13 765 * ---- 1/2 NC Hex locknut
14 11900 ---- 1/2 NC Flanged hex locknut
*Obtain Locally
DB2158
REF PART QTY DESCRIPTION
1 ----- 1 Parking jack
2 12550 1 Attitude rod assembly
3 9856 1 3-Joint tongue
4 ----- - Frame mast plate
5 30068 - 3/4 NC x 2-1/2 HHCS GR5
6 2864 * - 3/4 SAE Flat washer
7 14335 - 3/4 x 7/8 x 13/16 HT Bushing
8 2371 * - 3/4 NC Hex nut
9 1285 * - 1/4 x 1-1/2 Cotter pin
10 445 - 1 x 2-1/2 Clevis pin
11 11854 - 5/8 NC x 2-1/2 HHCS GR8
12 31503 - 1-1/16 x 2-3/4 x 1/4 HT Washer
13 23648 - Tractor drawbar tongue bracket
14 6239 * - 5/8 NC Hex locknut
* Obtain Locally