Woods 208-2 - 208-2 Front 2;3 of 3-Joint Drive for Splined Telescopic Shaft

Parts 51
32394 (Rev. 9/3/2004)
208-2 FRONT 2/3 OF 3-JOINT DRIVE FOR SPLINED TELESCOPIC SHAFT
(PULL-TYPE UNITS ONLY)
1
4
4
6
3
CD5029A
2
7
8
8
9
10
12
11
5
PLASTIC SHIELDING
9
8
STEEL SHIELDING
NOTE: Four Styles of driveshafts
have been used on the 208 series
cutters. Check your driveshaft for
square, splined, tri -lobe, or
two -lobe shape and order repair
parts from the correct parts list.
Ref Part No
No No Used Description
1 52705 1 2 Joints shielded
2 55143 1 Yoke QD 1--3/8--6 35 Series
540 only (includes #3)
Ref Part No
No No
Used Description
3 52518 1 Slide lock yoke repair kit
4 110 2 U--Joint cross and bearing kit, 35R
5 55144 1 Square shaft and yoke 35
6 32448 1 Pin, .37D OD x 2.375
7 55145 1 Yoke 35 x 1.19 Square bore
8 55148 1 Bearing drive shield 2.75 x 2.08 x .36
(Steel Shielding)
8 1009059 1 Nylon shield bearing repair kit
(Plastic Shielding)
9 55147 1 Shield for front 2 joints with bearings
(includes #8)
10 15308 1 1--3/8 Spline clamp yoke, 35R
11 19811 1 1/2 NC x 2 Hex head cap screw GR8
12 765 1 1/2 NC Hex locknut