Safety 7
32394 (Rev. 9/3/2004)
Pull-Type
Unit
(splined
driveshaft)
Mounted
Unit
Pull-Type
Unit
1
Note: Shield shown
must be used for
Pull-Type Units with
square driveshafts
1
Pull-Type
Unit
(square
driveshaft)
MODELNO. SERIALNO. MASS (KG)
ID NO.
OREGON, IL U.S.A.
YR OF MFG.
11 - SERIAL NUMBER PLATE
DO NOT EXCEED PTO SPEED OF
540 RPM
PTO speeds higher than 540 RPM can cause
equipment failure and personal injury.
WARNING
18866-D
DANGER
ROTATING DRIVELINE
CONTACT CAN CAUSE DEATH
KEEP AWAY!
DO NOT OPERATE WITHOUT -
All driveline guards, tractor and
equipment shields in place
Drivelines securely attached at both ends
Driveline guards that turn freely on
driveline
18864-C
1 - PN 18864
3 - PN 18866
9 - FRONT AMBER
REFLECTOR (20105)
10 - REAR RED
REFLECTOR (20106)
SAFETY & INSTRUCTIONAL DECALS
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
Replace Immediately If Damaged!
To Next Page
Loading...
