Parts 55
32394 (Rev. 9/3/2004)
M208-2 DRIVELINE - TWO LOBE SHAFT
1
2
4
3
5
14
12
21
23
12
22
24
6
7
3
2
20
Ref Part No
No
No Used Description
1 40574 1 Yoke, 1--3/8--6SP (complete with
lock collar)
2 110 2 Cross and bearing kit
3 40764 2 Spring pin 10mm x 80mm (pkg.
of 10)
4 40575 1 Inboard yoke (male drive tube)
5 40587 1 Inner profile (cut to length)
6 40588 1 Outer profile (cut to length)
7 40576 1 Inboard yoke (female drive tube)
8 40570 1 Yoke (shear--bolt)
-- o r --
8 45041 1 Yoke (slip--clutch)
12 40766 2 Bearing ring (pkg. of 2)
14 40778 2 Screw (pkg. of 10)
17 40777 2 Anti-rotation chain
CD5578
14
17
18
19
8
8
Ref Part No
No
No Used Description
18 765 1 1/2NC Locknut
19 3489 1 1/2 NC x 3 Hex head capscrew,
GR5
20 40589 1 Lock collar repair kit (without
yoke)
21 40590 1 Guard, outer half, also includes
items 12, 17 and 14 (cut to length)
22 40591 1 Guard, inner half, also includes
items 12, 17 and 14 (cut to length)
23 40731 1 Shaft assembly, male half (com-
plete with guard)
24 40732 1 Shaft assembly, female half (with
guard, without slip--clutch yoke)
-- o r --
24 40769 1 Shaft assembly, female half
(complete with guard and shear--
bolt yoke)
17
NOTE: Four Styles of driveshafts have
been used on the 208 series cutters. Check
your driveshaft for square, splined, tri-lobe,
or two--lobe shape and order repair parts
from the correct parts list.
To Next Page
Loading...
