Insulation Blowing Machine M99
Page 2 of 51
X-Floc Dämmtechnik-Maschinen GmbH
Rosine-Starz-Straße 12 · 71272 Renningen · Germany
Phone +49-7159-80470-30 · Fax -40 | info@x-floc.com · www.x-floc.com
Contents Page
1 About the Operating Instructions 4
2 Safety Notes 6
2.1 General Notes 6
2.1.1 General 6
2.1.2 In the event of an emergency 6
2.2 Intended & Non-Intended Use 6
2.2.1 Intended Use 6
2.2.2 Non-Intended Use 6
2.3 General Safety Notes 6
2.3.1 Qualified Personnel 6
2.3.2 Operator 6
2.3.3 Qualified Electrician 6
2.4 Safety Devices 7
2.5 Spare Parts 7
2.6 Insulation Materials 7
2.7 Resale 7
3 General Technical Description 8
3.1 Full Diagram 8
3.2 Control Elements 10
3.3 Delivery Contents 12
3.4 Technical Details 12
3.4.1 Serial Plate 12
3.4.2 Technical Details 13
4 Preparation 14
4.1 Transport, Assembling & Connecting 14
4.1.1 Unpacking & setup 14
4.1.2 Power Connection 15
4.1.3 Suction Hood 15
4.1.4 Outlet Connection 16
4.1.5 Control Connection M99/M99-DS 16
4.1.6 Control Connection M99-DS-Pro 16
5 Operation 17
5.1 Cable Remote Control KFB
3 17
5.1.1 Switching the Machine On 18
5.1.2 Machine Operation 18
5.1.3 Cable Remote Control KFB
2000 18
5.2 Radio Remote Control FFB
400 19
5.2.1 Control Activation 20
5.2.2 Machine Operation 20
5.2.3 Key Lock Settings 20
5.2.4 Battery Status 20
5.2.5 Deceleration Time Setting 21
5.2.6 Hand-held Control and Receiver Configuration 22
5.2.7 Radio Remote Control FFB
2000-Pro 22
5.3 Functionality 23
5.4 Airlock Feed Gate 24
5.5 Airlock Rotational Speed (DS) (optional) 24
5.6 Initial Commissioning 25
5.7 Normal Operation 25
5.7.1 Establishing Operational Readiness 25
5.7.2 Warm Up 25
5.7.3 Initial Operation 25
5.7.4 Decommissioning 26
To Next Page
Loading...
Need help?
General