Insulation Blowing Machine M99
Page 4 of 51
X-Floc Dämmtechnik-Maschinen GmbH
Rosine-Starz-Straße 12 · 71272 Renningen · Germany
Phone +49-7159-80470-30 · Fax -40 | info@x-floc.com · www.x-floc.com
1 About the Operating Instructions
1.1 Preface
Dear X-Floc customer,
Thank you for your trust in our product. We hope you don’t encounter any problems whilst operating the
insulation blowing machine M99.
This operating manual contains all the important information for safe and optimal operation with the
insulation blowing machine. The operating manual must be read carefully before initial operation and be
kept at hand at the site of use.
It is imperative that all persons who intend to use this machine read the operating manual carefully, ensuring
they are familiar with all the safety notices prior to operating the machine. A fixed storage site for the
operating instructions must be specified by the operator.
The operating manual must be used in accordance with national law which is based on accident prevention
and environmental protection. The binding rules surrounding accident prevention and the recognized
technical rules governing safe and proper work applicable in the country and at the site of use are to be fully
acknowledged. Our General Terms & Conditions apply.
In case of any obscurities or if you have any questions regarding the insulation blowing machine, please
contact our customer service team. In order to provide you with the best help and support possible, please
have the product and model numbers as well as the technical features ready.
Due to continuous developments on our products, it is possible that new features have not yet been
accounted for in this manual. The latest information about the insulation blowing machine M99 are
obtainable by contacting our customer service team.
The contents of this document must not be wholly or partially passed on and/or reproduced without written
consent. All technical information, illustrations, sketches, etc. are strictly subject to the protection of
Copyright law.
For any queries regarding your purchase, please contact your distributor or:
X-Floc Dämmtechnik-Maschinen GmbH
Rosine-Starz-Str. 12
71272 Renningen
Germany
Phone: + 49-7159-80470-30
Fax: + 49-7159-80470-40
Email: info@x-floc.com
Web: www.x-floc.com
Your X-Floc distributor As o
: 09.10.2015
To Next Page
Loading...
Need help?
General