X-FLOC Minifant M99 - Control Elements

Insulation Blowing Machine M99
Page 10 of 51
X-Floc Dämmtechnik-Maschinen GmbH
Rosine-Starz-Straße 12 · 71272 Renningen · Germany
Phone +49-7159-80470-30 · Fax -40 | info@x-floc.com · www.x-floc.com
3.2 Control Elements
[RPM]
20...100%
20...100%
30%
100
%
40
%
20%
50
%
60%
90
%
80%
70%
30%
100
%
40
%
90
%
80
%
20
%
50
%
60% 70%
20...100%
20...100%
1
1
2
M2
M2
M3
17
18
19
20
22
Bezeichnung:
Serien-Nr.:
Baujahr:
Gewicht:
Netz:
Nenndaten:
Einblasmaschine
M99FXXXX
XX/20XX
ca. 120
kg
230 V / 50 Hz / 16 A
3,6 kW
Typ:
M99F-DS-Pro
23
24
25
26
Bezeichnung:
Serien-Nr.:
Baujahr:
Gewicht:
Netz:
Nenndaten:
Einblasmaschine
M99FXXXX
XX/20XX
ca. 120
kg
230 V / 50 Hz / 16 A
3,6 kW
Typ:
M99F-DS
Mains voltage
[V]
21
P3
P4
S1
S2
R2
R1
Q1
Q2
P2
P1
Figure 3: Control elements electrical switchboard [6] M99
Pos. Control Element Purpose
17
Signal light ready for use P3 Display for operational readiness
18
Rotary airlock fault light and conditioning
unit fault light P4
Display for faults with the rotary airlock [8] and the conditioning
unit [9]
19 Main switch Q1 Switching the insulation blowing machine on and off
20 Blower selector switch Q2 Blower setting choice, M2 or M2 + M3
21 Mains voltage display P2 230 V (optional) Digital display of the power supply voltage
22 Operating hours meter P1 Display for all operating hours
23
Blower power selector R1 (M99, M99-DS) Blower power setting
24 Material flow volume selector R2 (M99-DS)
Rotary airlock [8] and conditioning unit‘s [9] rotational speed
setting
25
Reverse operation selector Q5 (M99) /
S1 (M99-DS, M99-DS-Pro)
Reverse operation of the rotary airlock [8] and the conditioning
unit [9] during maintenance work
26
Rotary airlock and conditioning unit
maintenance button S1 (M99) /
S2 (M99-DS, M99-DS-Pro)
Forward rotation of the rotary airlock [8] and the conditioning unit
[9] during maintenance work and for pre-crushing