Insulation Blowing Machine M99
X-Floc Dämmtechnik-Maschinen GmbH Page 33 of 51
Rosine-Starz-Straße 12 · 71272 Renningen · Germany
Phone +49-7159-80470-30 · Fax -40 | info@x-floc.com · www.x-floc.com
6.3 Disposal
6.3.1 Final Decommissioning
When the insulation blowing machine M99 is set to go through final decommissioning, a disassembly must
be in the machine’s individual parts.
CAUTION!
Danger of injury from improper disassembly!
Improper disassembly can lead to injuries and property damages.
During disassembly which the operator can and may not fix due to his level of
knowledge, a qualified specialist must be contacted.
During final decommissioning, disconnect the insulation blowing machine from the power connection and
dispose the machine with all the individual parts dismantled according to the various materials and the
environmental protection guidelines.
6.3.2 Disposal According the Environmental Protection
According to environmental protection guidelines, it is forbidden to throw away cable remnants, oil and
machine parts into household waste!
For this reason, please throw away cable remnants, oil and machine parts into the
appropriate recycling container or send your insulation blowing machine back us, ensuring
you give us prior notice.
To Next Page
Loading...
Need help?
General