Xantrex XDC - Page 172

Remote Operation
SCPI Commands for Digital Interfaces
170 Operating Manual for XDC Series Power Supply
Power Sub-Register Commands
Query Power Sub-Register Event
SCPI command:
STATus[<channel>]:QUEStionable:POWer[:EVENt]?
Query Power Sub-Register Condition
SCPI command:
STATus[<channel>]:QUEStionable:POWer:CONDition?
Enable Power Sub-Register
SCPI command:
STATus[<channel>]:QUEStionable:POWer:ENABle
<status-enable>
Query Format:
STATus[<channel>]:QUEStionable:POWer:ENABle?
Set Power Positive Transition Filter
SCPI command:
STATus[<channel>]:QUEStionable:POWer:PTRansition
<status-enable>
Query Format:
STATus[<channel>]:QUEStionable:POWer:PTRansition?
Set Power Negative Transition Filter
SCPI command:
STATus[<channel>]:QUEStionable:POWer:NTRansition
<status-enable>
Query Format:
STATus[<channel>]:QUEStionable:POWer:NTRansition?