Xerox 2510

Replacement
CAUTION
Do not install the toner cartridge until
the developer module
is installed.
1. (Figure 3): Clean the developer from the
magnetic roll.
A
ROTATE THE DEVELOPER
MODULE TO
REST ON THE
BAR AND HOLD WHILE
n DOING THE STEPS B. C AND D
/" - *' :Sj -
WIPE YOUR FINGER ACROSS
CLEARED FROM THE
MAGNETIC ROLL
THE ENTIRE LENGTH
OF THE
SURFACE.
Flgure 3. Cleaning the Developer from the Magnetic Roll
(Continued)
REP 9.6