Xerox 2510 User Manual

I
NOTE: STEP 13 C: Ensure that all the
15. Reinstall the ~ick off baffle.
12. (251 5) Remove the pickoff baffle and store
it in a safe place to avoid damaging it.
CAUTION
Do not turn the developer module to the
vertical position. This may cause
developer to get into the
-dry ink
cartridge clutch at the end of the
Developer Module.
developer
is dumped.
( 2515, Figure 10): Dump the developer
material.
Completely vacuum the developer housing.
CAUTION
STEP 16 A: The pick off baffle must be
taped before replacing the dry ink
cartridge to ensure that the pick off
baffle does not move causing damage.
16. (Figure 11): 'Tape the pick off baffle.
-I€ DROP CLOTH
TURN THE
DEVELOPER
MODULE OVER
1
Figure 10. (251 5) Dump the Developer ~ahd
Figure I I. (251 5) Tape the Pick Off Baffle
Removal

Xerox 2510 Specifications

General

Brand	Xerox
Model	2510
Category	Copier
Language	English