Xerox 6015/NI - Making the Image Lighter or Darker; Adjusting the Sharpness; Changing the Auto Exposure Level; Setting the Margins

Scanning
124 WorkCentre 6015 Color Multifunction Printer
User Guide
Making the Image Lighter or Darker
1. To select Lighten/Darken, press the arrow buttons, then press OK.
2. To lighten or darken the image, press the arrow buttons to move the slider.
3. Press OK.
Adjusting the Sharpness
1. To select Sharpness, press the arrow buttons, then press OK.
2. Select a sharpness setting:
 Sharpest
 Sharper
 Normal
 Softer
 Softest
The default setting is Normal.
3. Press OK.
Changing the Auto Exposure Level
1. To select Auto Exposure Level, press the arrow buttons, then press OK.
2. Select an auto exposure setting:
 Off
 On
The default setting is On.
3. Press OK.
Setting the Margins
1. To select the margin you want to change, press the arrow buttons for:
 Margin Top/Bottom
 Margin Left/Right
 Margin Middle
2. Press OK.
3. Adjust the margins from 0.0–2.0 in. using the arrow buttons.
4. Press OK.
5. Repeat the steps for other margins, then press the Return button.