Xerox 6015/NI User Manual

Installation and Setup
52 WorkCentre 6015 Color Multifunction Printer
User Guide
Configuring Network Settings
This section includes:
 About TCP/IP and IP Addresses ................................................................................................................................. 52
 Assigning the IP Address of the Printer ................................................................................................................... 53
 Setting Up the Fax Header ........................................................................................................................................... 56
 Enabling the Printer for Scanning .............................................................................................................................. 57
Note: Available on WorkCentre 6015N/NI Color Multifunction Printer only.
About TCP/IP and IP Addresses
Computers and printers primarily use TCP/IP protocols to communicate over an Ethernet network.
Generally, Macintosh computers use either TCP/IP or the Bonjour protocol to communicate with a
network printer. For Macintosh OS X systems, TCP/IP is preferred. Unlike TCP/IP, however, Bonjour does
not require printers or computers to have IP addresses.
With TCP/IP protocols, each printer and computer must have a unique IP address. Many networks and
cable and DSL routers have a Dynamic Host Configuration Protocol (DHCP) server. A DHCP server
automatically assigns an IP address to every computer and printer on the network that is configured to
use DHCP.
If you use a Cable or DSL router, see the documentation for your router for information on IP addressing.

Xerox 6015/NI Specifications

General

Brand	Xerox
Model	6015/NI
Category	All in One Printer
Language	English