Troubleshooting
170 WorkCentre 6015 Color Multifunction Printer
User Guide
Condensation has Formed Inside the Printer
Moisture can condense inside a printer where the humidity is above 85% or when a cold printer is located
in a warm room. Condensation can form in a printer after it has been sitting in a cold room that is heated
quickly.
The printer has been sitting in a cold room.
Allow the printer to operate for several hours at room temperature.
The relative humidity of the room is too high.
Reduce the humidity in the room.
Move the printer to a location where the temperature and
relative humidity are within the operating specifications.
To Next Page
Loading...
