Features 
 
  WorkCentre 6015 Color Multifunction Printer  35 
  User Guide 
 
Default Settings Menu 
This section includes: 
  Copy Defaults .................................................................................................................................................................... 35 
  Scan Defaults .................................................................................................................................................................... 36 
  Fax Defaults ....................................................................................................................................................................... 36 
  Print from USB Defaults ................................................................................................................................................ 37 
Use the Default Settings menu to set default behaviors for Copy, Scan, Fax, and Print from USB functions. 
 
 
Copy Defaults 
Use this menu to set default copying behaviors. For details, see Selecting the Default Copy Settings on 
page 101. 
 
Specifies Black and White or Color output. 
Turns collation On or Off. 
Reduces or enlarges the copies. 
Specifies the size of the original. 
Specifies the type of the original. 
Lightens or darkens the output. 
Specifies the sharpness of the copies. 
Turns Auto Exposure On or Off when copying. Auto Exposure suppresses the document 
background of off-white colored paper and show-through when copying 2-sided thin 
paper. 
Adjusts the red levels of your copies. 
Adjusts the green levels of your copies. 
Adjusts the blue levels of your copies. 
Adjusts the gray balance of the copies to neutral gray. 
Use to copy two original page images onto one side of a sheet of paper: 
  Off 
  Auto (Autoscale) 
  ID Card Copy 
  Manual (Manual Scale) 
Turns On or Off the copy margins for the top and bottom of the page. 
Turns On or Off the copy margins for the left and right of the page. 
Turns On or Off the copy margins for the middle of the page. Use to create a gutter in the 
middle of the page when you print using the N-up feature.