Faxing 
 
  WorkCentre 6015 Color Multifunction Printer  137 
  User Guide 
 
Selecting Fax Options for Single Jobs 
This section includes: 
  Setting the Fax Resolution ......................................................................................................................................... 137 
  Making the Image Lighter or Darker ...................................................................................................................... 137 
  Turning OnHook On or Off ......................................................................................................................................... 137 
  Sending a Delayed Fax ................................................................................................................................................ 137 
  Including a Fax Cover Page ....................................................................................................................................... 138 
  Setting Up Polling .......................................................................................................................................................... 138 
 
 
Setting the Fax Resolution 
1.  On the printer control panel, press the Fax button. 
2.  To select Resolution, press the arrow buttons, then press OK. 
3.  Select an option. The default setting is Standard. 
4.  Press OK. 
 
Making the Image Lighter or Darker 
1.  On the printer control panel, press the Fax button. 
2.  To select Lighten/Darken, press the arrow buttons, then press OK. 
3.  To move the slider to lighten or darken the fax, press the arrow buttons. The default setting is 
Normal. 
4.  Press OK. 
 
Turning OnHook On or Off 
When you turn on the OnHook option, the telephone line is ready to dial out when you enter a phone 
number. You cannot receive incoming faxes while OnHook is turned on. 
To turn OnHook on or off: 
1.  On the printer control panel, press the Fax button. 
2.  To select OnHook, press the arrow buttons, then press OK. 
3.  Select Off or On, then press OK.