Xerox 6015/NI - Image-Quality Settings

Copying
98 WorkCentre 6015 Color Multifunction Printer
User Guide
Image-Quality Settings
This section includes:
 Reducing or Enlarging the Image .............................................................................................................................. 98
 Making the Image Lighter or Darker ........................................................................................................................ 98
 Adjusting the Sharpness ................................................................................................................................................ 98
 Setting Auto Exposure .................................................................................................................................................... 99
Reducing or Enlarging the Image
You can reduce the image to as little as 25% of its original size or enlarge it as much as 400%.
To reduce or enlarge the copied image:
1. To select Reduce/Enlarge, press the arrow buttons, then press OK.
2. Do one of the following:
 To select a preset image size, press the arrow buttons.
 To set the copy size in increments of 1%, press the arrow buttons or use the keypad to set the
percentage. The default setting is 100%.
3. Press OK.
Making the Image Lighter or Darker
1. To select Lighten/Darken, press the arrow buttons, then press OK.
2. To lighten or darken the image, press the arrow buttons to move the slider.
3. Press OK.
Adjusting the Sharpness
1. To select Sharpness, press the arrow buttons, then press OK.
2. Select a sharpness setting:
 Sharpest
 Sharper
 Normal
 Softer
 Softest
The default setting is Normal.
3. Press OK.