Installation and Setup
WorkCentre 6015 Color Multifunction Printer 45
User Guide
Selecting a Location for the Printer
1. Select a dust-free area with temperatures from 10–32°C (50–90°F), and relative humidity 15–85%.
Note: Sudden temperature fluctuations can affect print quality. Rapid heating of a cold room can
cause condensation inside the printer, directly interfering with image transfer.
2. Place the printer on a level, solid, non-vibrating surface with adequate strength for the weight of the
printer. The printer must be horizontal with all four feet in solid contact with the surface. To find the
weight for your printer configuration, see Physical Specifications on page 191.
After positioning the printer, you are ready to connect it to the power source and computer or network.
See also:
Total Space Requirements on page 191
Clearance Requirements on page 191
To Next Page
Loading...
Need help?
General
