Xerox 6015/NI User Manual

Troubleshooting
186 WorkCentre 6015 Color Multifunction Printer
User Guide
Symptom
Cause
Solution
Colors are blurry or there is
white area around objects.
Color-to-color alignment is not
correct.
Perform an automatic color registration
adjustment. For details, see Color
Registration on page 157.
Blotchy or mottled images.
The paper is too light or too thin.
Compensate for the paper thickness. For
details, see Adjusting Paper Type on page
158.
The bias transfer voltage needs to
be adjusted for the paper type.
Adjust the bias transfer roller. For details,
see Adjusting the Bias Transfer Roller on
page 158.
The fuser needs to be adjusted for
the paper type.
Adjust the fuser. For details, see Adjusting
the Fuser on page 158.
Paper curls or frequent jams in
the rear cover.
Bias transfer roller needs to be
refreshed.
Refresh the bias transfer roller. For
details, see Refreshing the Bias Transfer
Roller on page 159.

Xerox 6015/NI Specifications

General

Brand	Xerox
Model	6015/NI
Category	All in One Printer
Language	English