Printing
WorkCentre 6015 Color Multifunction Printer 79
User Guide
4. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
5. Load the paper into the tray with the top edge going into the printer and the print side up.
6. Adjust the width guides until they touch the edges of the paper.
7. If the paper you loaded is different from the paper in the main tray, set the correct paper type and
size. Ensure that you change the paper type and size at the control panel and in your print driver
software. For details, see Setting Paper Types, Size, and Display Screen on page 79.
Note: If you are printing on custom size paper, define the custom size in the printer properties before
printing. For details, see Defining Custom Paper Sizes on page 86.
To Next Page
Loading...
Need help?
General
