Xerox B410 - Maintenance; Configuration Menu

MAINTENANCE
Configuration Menu
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
UUSSBB CCoonnffiigguurraattiioonn
• USB PnP
– 1*
– 2
Change the USB driver mode of the printer to improve
its compatibility with a personal computer.
UUSSBB CCoonnffiigguurraattiioonn
• USB Speed
– Full
– Auto*
Set the USB port to run at full speed and disable its
high-speed capabilities.
TTrraayy CCoonnffiigguurraattiioonn
• Tray Linking
– Automatic*
– Off
Set the printer to link the trays that have the same
paper type and paper size settings.
TTrraayy CCoonnffiigguurraattiioonn
• Show Tray Insert Message
– Off
– Only for unknown sizes*
– Always
Display a message that lets the user change the paper
size and paper type settings after inserting the tray.
TTrraayy CCoonnffiigguurraattiioonn
• A5 Loading
– Short Edge
– Long Edge*
Determine the default loading orientation for the A5
size paper in all paper sources.
TTrraayy CCoonnffiigguurraattiioonn
• Paper Prompts
– Auto*
– Multi purpose feeder
– Manual Paper
Set the paper source that the user fills when a prompt
to load paper appears.
Note: For Multipurpose Feeder to appear, in the
Paper menu, set Configure MP to Cassette.
TTrraayy CCoonnffiigguurraattiioonn
• Envelope Prompts
– Auto*
– Multipurpose Feeder
– Manual Envelope
Set the paper source that the user fills when a prompt
to load envelope appears.
Note: For Multipurpose Feeder to appear, in the
Paper menu, set Configure MP to Cassette.
100
Xerox
®
B410 Printer User Guide
Use Printer Menus