Xerox B410 - Network;Ports

Network/Ports
Important: Some features are system administrator functions and the options are hidden from view. For
more information, refer to Embedded Web Server Administrator Guide at www.xerox.com/office/B410docs.
NETWORK OVERVIEW
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
AAccttiivvee AAddaapptteerr
• Auto*
• Standard Network
• Wireless
Specify how a network is connected.
Note: Wireless is available only in printers
connected to a wireless network.
NNeettwwoorrkk SSttaattuuss Show the connectivity status of the printer network.
DDiissppllaayy NNeettwwoorrkk SSttaattuuss oonn PPrriinntteerr
• Off
• On*
Show the network status on the display.
SSppeeeedd,, DDuupplleexx Show the speed of the currently active network card.
IIPPvv44 Show the IPv4 address.
AAllll IIPPvv66 AAddddrreesssseess Show all IPv6 addresses.
RReesseett PPrriinntt SSeerrvveerr Reset all active network connections to the printer.
Note: This setting removes all network
configuration settings.
NNeettwwoorrkk JJoobb TTiimmeeoouutt
• Off
• On* (90 seconds)
Set the time before the printer cancels a network print
job.
BBaannnneerr PPaaggee
• Off*
• On
Print a banner page.
EEnnaabbllee NNeettwwoorrkk CCoonnnneeccttiioonnss
• Off*
• On
Enable the printer to connect to a network.
EEnnaabbllee LLLLDDPP
• Off*
• On
Enable Link Layer Discovery Protocol (LLDP) in the
printer.
Note: An asterisk (*) next to a value indicates the factory default setting.
Xerox
®
B410 Printer User Guide 117
Use Printer Menus