WIRELESS
Note: This menu is available only in printers connected to a Wi-Fi network or printers that have a wireless
network adapter.
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
WWiirreelleessss CCoonnnneeccttiioonn SSeettuupp
• Network Name
• Compatibility
– 802.11b/g/n (2.4GHz)
– 802.11a/b/g/n/ac (2.4GHz/5GHz)*
– 802.11a/n/ac (5GHz)
Specify the wireless standard for the wireless network.
• Wireless Security Mode
– Disabled*
– WPA2/WPA — Personal
– WPA2 — Personal
– WPA2/WPA3 — Personal
– WPA3 — Personal
– 802.1x — RADIUS
Set the type of security for connecting the printer to
wireless devices.
• WPA2 — Personal
– AES*
Enable wireless security through WPA2.
Note: This menu item appears only if Wireless
Security Mode is set to WPA2-Personal.
SSeett PPrree SShhaarreedd KKeeyy Specify a password for secure Wi-Fi connection.
Note: This menu item appears only if Wireless
Security Mode is set to WPA2/WPA-Personal or
WPA2-Personal.
IIPPvv44
• Enable DHCP
– On*
– Off
Enable Dynamic Host Configuration Protocol (DHCP).
Note: DHCP is a standard protocol that lets a
server dynamically assign an IP address and
other network configuration parameters to each
device on the network, so that they can
communicate with other IP networks.
• Set Static IP Address
Set the static IP address of your printer.
118
Xerox
®
B410 Printer User Guide
Use Printer Menus
To Next Page