Xerox B410 - PostScript; PCL

POSTSCRIPT
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
PPrriinntt PPSS EErrrroorr
• Off*
• On
Print a page that describes the PostScript error.
Note: When an error occurs, processing of the
job stops, the printer prints an error message,
and the rest of the print job is flushed.
MMiinniimmuumm LLiinnee WWiiddtthh
1–30 (2*)
Set the minimum stroke width.
Note: Jobs printed in 1200 dpi use half the
value directly.
LLoocckk PPSS SSttaarrttuupp MMooddee
• Off
• On*
Disable the SysStart file.
FFoonntt PPrriioorriittyy
• Resident*
• Flash/Disk
Establish the font search order.
Note:
• Resident sets the printer to search its
memory for the requested font before
searching the hard disk.
• Flash/Disk sets the printer to search the hard
disk for the requested font before searching
the printer memory.
• This menu item appears only when a hard
disk is installed.
WWaaiitt TTiimmeeoouutt
• Off
• On* (40 seconds)
Enable the printer to wait for more data before
canceling a print job.
Note: An asterisk (*) next to a value indicates the factory default setting.
PCL
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
SSyymmbbooll SSeett Specify the symbol set for each font name.
Note: A symbol set is a set of alphabetic and
numeric characters, punctuation, and special
symbols. Symbol sets support the different
languages or specific programs such as math
symbols for scientific text.
PPooiinntt SSiizzee
110
Xerox
®
B410 Printer User Guide
Use Printer Menus