Xerox B410 - Page 111

MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
1.00–1008.00 (12*)
PPiittcchh
0.08–100 (10*)
Specify the pitch for fixed or monospaced fonts.
Note: Pitch refers to the number of fixed-space
characters in a horizontal inch of type.
OOrriieennttaattiioonn
• Portrait*
• Landscape
• Reverse Portrait
• Reverse Landscape
Specify the orientation of text and graphics on the
page.
LLiinneess ppeerr PPaaggee
1–255
Specify the number of lines of text for each page
printed through the PCL datastream.
Note:
• This menu item activates vertical
escapement that causes the selected
number of requested lines to print between
the default margins of the page.
• 60 is the U.S. factory default setting. 64 is
the international factory default setting.
PPCCLL55 MMiinniimmuumm LLiinnee WWiiddtthh
1–30 (2*)
Set the initial minimum stroke width.
Note: Jobs printed in 4800 CQ use half the
value.
PPCCLLXXLL MMiinniimmuumm LLiinnee WWiiddtthh
1–30 (2*)
AA44 WWiiddtthh
• 198mm*
• 203mm
Set the width of the logical page on A4-size paper.
Note: Logical page is the space on the physical
page where data is printed.
AAuuttoo CCRR aafftteerr LLFF
• On
• Off*
Set the printer to perform a carriage return after a line
feed control command.
Note: Carriage return is a mechanism that
commands the printer to move the position of
the cursor to the first position on the same line.
AAuuttoo LLFF aafftteerr CCRR
• On
• Off*
Set the printer to perform a line feed after a carriage
return control command.
TTrraayy RReennuummbbeerr
• Assign MP Feeder
• Assign Tray [x]
Configure the printer to work with a different print
driver or custom application that uses a different set of
source assignments to request a given paper source
Xerox
®
B410 Printer User Guide 111
Use Printer Menus