Xerox B410 - Device

Device
Important: Some features are system administrator functions and the options are hidden from view. For
more information, refer to Embedded Web Server Administrator Guide at www.xerox.com/office/B410docs.
PREFERENCES
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
DDiissppllaayy LLaanngguuaaggee
[List of languages]
Set the language of the text that appears on the
display.
CCoouunnttrryy//RReeggiioonn
[List of countries or regions]
Identify the country or region where the printer is
configured to operate.
RRuunn iinniittiiaall sseettuupp
• Off*
• On
Run the setup wizard.
KKeeyybbooaarrdd
Keyboard Type
[List of languages]
Select a language as a keyboard type.
Note: All the Keyboard Type values may not
appear or may require special hardware to
appear.
DDiissppllaayyeedd iinnffoorrmmaattiioonn
• Display Text 1 (IP Address*)
• Display Text 2 (Date/Time*)
• Custom Text 1
• Custom Text 2
Specify the information to appear on the home screen.
DDaattee aanndd TTiimmee
• Configure
– Current Date and Time
– Manually Set Date and Time
– Date Format (MM-DD-YYYY*)
– Time Format (12 hour A.M./P.M.*)
– Time Zone
– UTC (GMT) Offset
– DST Start
– DST End
– DST Offset
• Network Time Protocol
Configure the printer date and time and network time
protocol.
Note:
• MM-DD-YYYY is the U.S. factory default
setting. DD-MM-YYYY is the international
factory default setting.
• UTC (GMT) Offset, DST Start, DST End, and
DST Offset appear only when Time Zone is
set to (UTC+user) Custom.
• Key ID and Password appear only when
Enable Authentication is set to MD5 key.
Xerox
®
B410 Printer User Guide 93
Use Printer Menus