Xerox B410 - IPSec

MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
– Authentication, Privacy*
• Privacy Algorithm
– DES
– AES-128*
Note: An asterisk (*) next to a value indicates the factory default setting.
IPSEC
Note: This menu appears only in network printers or printers that are attached to print servers.
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
EEnnaabbllee IIPPSSeecc
• Off*
• On
Enable Internet Protocol Security (IPSec).
BBaassee CCoonnffiigguurraattiioonn
• Default*
• Compatibility
• Secure
Set the IPSec base configuration.
Note: This menu item appears only when
Enable IPSec is set to On.
DDHH ((DDiiffffiiee--HHeellllmmaann)) GGrroouupp PPrrooppoossaall
• modp2048 (14)*
• modp3072 (15)
• modp4069 (16)
• modp6144 (17)
Set the IPSec base configuration.
Note: This menu items appear only when Base
Configuration is set to Compatibility.
PPrrooppoosseedd EEnnccrryyppttiioonn MMeetthhoodd
• 3DES
• AES*
Set the encryption method.
Note: This menu items appear only when Base
Configuration is set to Compatibility.
PPrrooppoosseedd AAuutthheennttiiccaattiioonn MMeetthhoodd
• SHA1
• SHA256*
• SHA512
Set the authentication method.
Note: This menu items appear only when Base
Configuration is set to Compatibility.
IIKKEE SSAA LLiiffeettiimmee ((HHoouurrss))
• 1
• 2
• 4
• 8
• 24*
Specify the IKE SA expiry period.
Note: This menu item appears only when Base
Configuration is set to Secure.
128
Xerox
®
B410 Printer User Guide
Use Printer Menus