Xerox B410 - HTTP;FTP Settings; ThinPrint

HTTP/FTP SETTINGS
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
PPrrooxxyy
• HTTP Proxy IP Address
• HTTP Default IP Port
• FTP Proxy IP Address
• FTP Default IP Port
• Authentication
• User Name
• Password
• Local domains
Configure the HTTP and FTP server settings.
OOtthheerr SSeettttiinnggss
Enable HTTP Server (On*) Access the Embedded Web Server to monitor and
manage the printer.
Enable HTTPS (On*) Enable Hypertext Transfer Protocol Secure (HTTPS) to
encrypt data transferring to and from the print server.
Force HTTPS Connections (Off*) Force the printer to use HTTPS connections.
Enable FTP/TFTP (On*) Send files using FTP/TFTP.
HTTPS Device Certificate (default*) View the HTTP device certificate used on the printer.
Timeout for HTTP/FTP Requests (30*) Specify the amount of time before the server
connection stops.
Retries for HTTP/FTP Requests (3*) Set the number of retries to connect to the HTTP/FTP
server.
Note: An asterisk (*) next to a value indicates the factory default setting.
THINPRINT
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
EEnnaabbllee TThhiinnPPrriinntt
• Off*
• On
Print using ThinPrint.
PPoorrtt NNuummbbeerr
4000–4999 (4000*)
Set the port number for the ThinPrint server.
BBaannddwwiiddtthh ((bbiittss//sseecc))
100–1000000 (0*)
Set the speed to transmit data in a ThinPrint environment.
Xerox
®
B410 Printer User Guide 131
Use Printer Menus