Xerox D95 User Manual

Standard Finisher Plus maintenance.........................................................................24-8
Standard Finisher Plus consumable supplies............................................24-8
Replace the standard staple cartridge........................................................24-8
Replacing the Staple Waste Container on the finisher......................24-10
Empty the Punch Waste Container............................................................24-12
Problem solving...............................................................................................................24-13
Paper jams in the Finisher Module.............................................................24-13
Paper jams in Tray 8/T1 (Post-Process Inserter)......................24-13
Paper jams inside the finisher left cover.....................................24-14
Paper jams inside the finisher right cover..................................24-17
Paper jams at the optional C/Z Folder.........................................24-22
Paper jams at the finisher output area.......................................24-29
Paper jams in the Finishing Transport......................................................24-30
Paper jams in area 1...........................................................................24-30
Paper jams in area 2...........................................................................24-32
Paper jams in area 3...........................................................................24-33
Paper jams in area 4...........................................................................24-34
Stapler faults.......................................................................................................24-35
Staple jams in the standard staple cartridge...........................24-35
Standard Finisher Plus fault codes.............................................................24-37
Finisher Module fault codes.............................................................24-37
Finishing Transport fault codes......................................................24-38
Third-party DFA fault codes.............................................................24-42
Specifications...................................................................................................................24-44
Finisher Module specifications....................................................................24-44
Optional C/Z Folder.............................................................................24-47
Finishing Transport specifications..............................................................24-47
User Guidexiv
Table of Contents

Xerox D95 Specifications

General

Brand	Xerox
Model	D95
Category	Copier
Language	English