Xerox D95 User Manual

The copy result is not what was expected
Causes and ActionsYes/NoSymptoms
The document glass or the document cover is dirty.CauseYesThe copy is dirty
If No, go to next
symptom.
Clean the document glass or the document cover.Action
If problem is not solved, go to next Cause/Action.
The document is made of highly transparent
material like a transparency.
Cause
If the document is highly transparent, marks on
the document cover will be copied. Place a white
sheet of paper on the document and make a copy.
Action
If problem is not solved, go to next Cause/Action.
Color paper, rough paper, or blueprint paper is
being used.
Cause
The background color of the paper is copied. Either
adjust the copy density or image quality, or specify
suppress background color, and retry copying.
Action
If problem is not solved, go to next Cause/Action.
Glossy printing paper is being used.Cause
Glossy printing paper easily sticks to the document
glass, and shadows are sometimes copied and
reproduced as dirt. Place a transparency or highly
transparent film under the document and retry
copying.
Action
Copy density is set to Dark, or to Light.CauseYesThe copy is too dark or
too light
If No, go to next
symptom.
Adjust the copy density.Action
If problem is not solved, go to next Cause/Action.
Density of the document is too light.Cause
Adjust the copy density.Action
If problem is not solved, go to next Cause/Action.
The Original Type is inappropriate.Cause
Copy black text. If it is too light, select Text for
Original Type.
Action
Causes and ActionsYes/NoSymptoms
Paper set in the paper tray is misaligned.CauseYesThe copy shifts slightly
If No, go to next
symptom.
Align the edges of the paper, and load it flush against
the front tray corners.
Refer to .
Action
15-39Xerox
®
D95/D110/D125/D136 Copier/Printer
User Guide
Problem solving

Xerox D95 Specifications

General

Brand	Xerox
Model	D95
Category	Copier
Language	English