Paper jams at lever 3g and knob 3f
1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.
3. Move the lever 3g and turn the knob 3f and remove the jammed paper.
Note
If paper is torn, check inside the machine and remove it.
4. Return the lever 3g to its original position.
5. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
User Guide22-20
Standard/Booklet Maker Finisher
To Next Page
Loading...
Need help?
General