To Next Page

To Previous Page

Note

The Interface Module is not available with the D95 Copier/Printer configuration.

D110/D125 configurations

For either Copier/Printer or Printer only, the Interface Module is required with the

following finishing devices:

• GBC AdvancedPunch

• Perfect Binder (available only with the Copier/Printer with integrated controller)

• High Capacity Stacker (HCS)

• Standard Finisher Plus

• All third-party, DFA devices

Note

The Interface Module is NOT required when the only finishing device is the Standard

Finisher or Booklet Maker Finisher. The SquareFold Trimmer Module is available only

with the Booklet Maker Finisher.

D136 configuration

For either Copier/Printer or Printer only, the Interface Cooling Module is required with

ALL following finishing devices, which include:

• GBC AdvancedPunch

• Perfect Binder (available only with the Copier/Printer with integrated controller)

• High Capacity Stacker (HCS)

• Standard Finisher

• Booklet Maker Finisher

• SquareFold Trimmer Module (available only with the Booklet Maker Finisher)

• Standard Finisher Plus

• All third-party, DFA devices

User Guide19-2

Interface Module/Interface Cooling Module

Xerox D95 User Manual

Other manuals for Xerox D95