Xerox D95 User Manual

If the problem still exists, contact the Customer Support Center.
• Check the connection between the Interface Cooling Module and the HCS.
049-287
Cause: HCS communication or software fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Check the connection between the Interface Cooling Module and the HCS.
049-288
Cause: HCS communication or software fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Check the connection between the Interface Cooling Module and the HCS.
049-300
Cause: HCS communication or software fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Check the connection between the Interface Cooling Module and the HCS.
049-310
Cause: HCS communication or software fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Check the connection between the Interface Cooling Module and the HCS.
049-500
Cause: HCS communication or software fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Check the connection between the Interface Cooling Module and the HCS.
User Guide20-20
High Capacity Stacker (HCS)

Xerox D95 Specifications

General

Print Speed	Up to 95 ppm
Print Resolution	2400 x 2400 dpi
First-Print-Out Time	As fast as 3.5 seconds
Duplex Printing	Yes
Standard Paper Size	A4
Max Paper Size	13 x 19 in.
Connectivity	Ethernet, USB
Finishing Options	Stapling, Hole Punching, Folding
Warranty	1 year