4. Return the lever 3g its original position.
5. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
Paper jams at lever 4b and knob 3a
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs.
1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.
3. Move the lever 4b and turn the knob 3a; remove the jammed paper.
24-21Xerox
®
D95/D110/D125/D136 Copier/Printer
User Guide
Standard Finisher Plus
To Next Page
Loading...
