Paper jams in areas 4b and 4c
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs.
1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.
3. Move the levers 4b and 4c; remove the jammed paper.
Note
If paper is torn, check inside the machine and remove it.
4. Return the opened levers ( 4b and 4c) their original positions.
5. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
User Guide24-28
Standard Finisher Plus
To Next Page
Loading...
Need help?
General