6.5 Checking Printer Status via E-mail 123
Rules for Using Commands
Use each command according to the following rules.
• Prefix all commands with “#”, and specify the #Password command at the top of the
e-mail.
• Command lines without “#” are ignored.
• Write one command on each line and separate each command and parameter with a
space or a tab.
• When the same command is written two or more times in one e-mail, the second and
subsequent commands are ignored.
Example of Commands
1. When the read only password is “ronly”, and to check the printer status.
#Password ronly
#Status
To Next Page
Loading...
