6.10 Adjusting the Altitude 127
6.10 Adjusting the Altitude
When installing the printer in a high-altitude location or a location with low air pressure,
adjust the Altitude setting. The altitude can be set to 0 m, 1000 m, 2000 m, or 3000 m. Select
the value that is closest to the altitude of the printer. The default is 0m.
1. Press the <Menu> button to display the Menu screen.
2. Press the <S> or <T> button until [Admin Menu] is displayed, then press the <X> or
<Eject/Set> button.
3. Press the <S> or <T> button until [Maintenance Mode] is displayed, then press the
<X> or <Eject/Set> button.
4. Press the <S> or <T> button until [Adjust Altitude] is displayed, then press the <X>
or <Eject/Set> button.
5. Press the <S> or <T> button to set the value, then press the <Eject/Set> button. The
value can be set to 0 m, 1000 m, 2000 m, or 3000 m. The default is [0 m].
6. Press the <Menu> button.
To Next Page
Loading...
