16 1 Basic Operations
1.2 Switching On and Off the Printer
Switching On the Power
1. Press the power switch of the printer to the
<
I> position.
2. When the power is on, “Diagnosing...” is
displayed on the control panel, then it
changes to "Please wait...". Check that this
display changes to “Ready to print”.
Important
• If an error message is displayed, refer to “Error
Messages” (P. 94) for information on how to fix it.
Switching Off the Power
Important
• Do not switch off the power to the printer when printing is in progress. It may lead to a paper jam.
• Once the power is switched off, print data remaining in the printer or information saved in the memory of
the printer will be deleted.
1. Check the display on the control panel, to
confirm that the printer is not processing
any data.
2. Press the power switch for the printer to the
<{> position to switch off the power.
To Next Page
Loading...
