5.1 When Paper Jams 85
7. Insert the tray into the printer, and push 
until it stops.
Important
• Do not use excessive force on the tray. Doing so could 
damage the tray or the inside the printer.
Paper Jams at the Fuser Unit
1. Press the button and open the front cover.
2. Lift the levers at both ends of the fuser unit, 
and remove the jammed paper. If the paper 
is torn, remove any scraps of paper 
remaining inside the printer.
Important
• The fuser is hot. Do not touch, doing so may cause 
burns.
3. Open the chute gate of the fuser unit and 
remove the jammed paper.
4. Completely push down the levers at both 
ends of the fuser unit.